AL-CPU-M.1-A.10i
Product code: PK0101 11 081000 00 | GTIN: 5905359823025
CPU (PLC) with built-in 8-channel I/O module.
-
Built-in I/O
The device has a built-in (internal) 8-channel input/output module AL-IO-A.10i.
8 configurable (universal) channels: AI/DI/DO, working as:
- Current analog inputs: nominal ranges 0-20mA
- Voltage analog inputs: nominal ranges 0-10V, 0-24V
- digital inputs (realized as voltage measurement; this allows to set the threshold and hysteresis): nominal ranges 0-24V
- digital outputs: OC (active low) 100mA
All channels are configurable in the above-mentioned range (each channel can operate as voltage input, current input, digital input or digital output).
Identical types and parameters of channels are also available through system configuration based on external modules built from the set: CPU model AL-CPU-M.1-0.00i connected to the I/O module model AL-IO-A.10 (8 channels) or model AL-IO-A.30 (12 channels).
Interface
2 x Modbus RTU (RS-485 isolated and non-isolated), Ethernet, local user interface (OLED display, buttons), USB OTG (communication with AL Utility™; USB memory support), microSD.
Modularity/expandability of the system
The device with additional modules is mounted on a DIN rail. Easy assembly and expansion of the system is facilitated by the built-in latches (apply-and-press type), without the need for additional brackets or adapters. The AL-CPU unit allows you to connect and power up to 10 AL-IO modules (in total up to 128 measuring inputs and control outputs) through special system connectors mounted in the DIN rail recess (no wiring required). These connectors simultaneously form the communication and power bus for the Ambity Line™ system.
-
Power supply:
Voltage
22..24..26 VDC
Power consumption
Typically 150mA @24V (max. 250mA)
Power source
External stabilized power supply
Measurement and control:
Number of channels
8
including configurable
8 (all types of signals)
Signal type
AI/DI/DO (current, voltage or digital)
Current inputs
0-20mA (max. 0-24mA)
Voltage inputs
0-10V (max. 0-11V)
0-24V (max. 0-28V)
Digital input (realized as voltage measurement)
0-24V
Digital outputs
max. 30V, 100mA
Processor, memory, performance:
Processor
ARM Cortex-M7 200MHz
User program size
Up to 2 MB
Stored in the internal file system
User program memory
1 MB MCU FLASH (fast; program code only)
128 kB MCU SRAM (fast; only stack and program data)
4 MB SDRAM (shared between code and data)
RETAIN data size
0.25 MB (saved to the internal file system when the user program is stopped and restored when the user program is started)
Configurable program cycle time
50..1000ms
Installation:
Type of installation
DIN rail, Type O, 35 mm
Full specification in the attached Product Data Sheet.