AL-CPU-M.2-A.14i

Product code: PK0101 12 04204D 00 | GTIN: 5905359823162
CPU (PLC) with built-in 8-channel I/O module.

Built-in I/O

The device has a built-in (internal) 8-channel input/output module AL-IO-A.14i.

4 configurable (universal) channels: AI/DI, working as:
- Current analog inputs: nominal ranges 0-20mA
- Voltage analog inputs: nominal ranges 0-10V, 0-24V
- digital inputs (realized as voltage measurement; this allows to set the threshold and hysteresis): nominal ranges 0-24V
and 4 dedicated channels DO:
- digital outputs: OC (active low) 100mA
Identical types and parameters of channels are also available through system configuration based on external modules built from the set: CPU model AL-CPU-M.2-0.00i connected to the I/O module model AL-IO-A.14 (8 channels) or model AL-IO-A.34 (12 channels).

Interface

Modbus RTU (RS-485 non-isolated), Ethernet, local user interface (OLED display, buttons), USB OTG (communication with AL Utility™; USB memory support), microSD.

Modularity/expandability of the system

The device with additional modules is mounted on a DIN rail. Easy assembly and expansion of the system is facilitated by the built-in latches (apply-and-press type), without the need for additional brackets or adapters. The AL-CPU unit allows you to connect and power up to 10 AL-IO modules (in total up to 128 measuring inputs and control outputs) through special system connectors mounted in the DIN rail recess (no wiring required). These connectors simultaneously form the communication and power bus for the Ambity Line™ system.

Power supply:
Voltage	22..24..26 VDC
Power consumption	Typically 150mA @24V (max. 250mA)
Power source	External stabilized power supply
Measurement and control:
Number of channels	8
including configurable	4 (as current, voltage or digital inputs)
Signal type	4 AI/DI ( current, voltage or digital) 4 DO
Current inputs	0-20mA (max. 0-24mA)
Voltage inputs	0-10V (max. 0-11V) 0-24V (max. 0-28V)
Digital input (realized as voltage measurement)	0-24V
Digital outputs	max. 30V, 100mA
Processor, memory, performance:
Processor	ARM Cortex-M7 200MHz
User program size	Up to 2 MB Stored in the internal file system
User program memory	1 MB MCU FLASH (fast; program code only) 128 kB MCU SRAM (fast; only stack and program data) 4 MB SDRAM (shared between code and data)
RETAIN data size	0.25 MB (saved to the internal file system when the user program is stopped and restored when the user program is started)
Configurable program cycle time	50..1000ms
Installation:
Type of installation	DIN rail, Type O, 35 mm
Full specification in the attached Product Data Sheet.