AL-CPU-M.2-0.00i
Product code: PK0101 12 000000 00 | GTIN: 5905359823018
CPU (PLC) without internal I/O channels.
-
The device does not have a built-in (internal) input/output module.
The device can be expanded with external AL-IO expansion modules (including current, voltage, digital), obtaining up to 120 inputs/outputs.
Interface
Modbus RTU (RS-485 non-isolated), Ethernet, local user interface (OLED display, buttons), USB OTG (communication with AL Utility™; USB memory support), microSD.
Modularity/expandability of the system
The device with additional modules is mounted on a DIN rail. Easy assembly and expansion of the system is facilitated by the built-in latches (apply-and-press type), without the need for additional brackets or adapters. The AL-CPU unit allows you to connect and power up to 10 AL-IO modules (in total up to 120 measuring inputs and control outputs) through special system connectors mounted in the DIN rail recess (no wiring required). These connectors simultaneously form the communication and power bus for the Ambity Line™ system.
-
Power supply:
Voltage
22..24..26 VDC
Power consumption
Typically 150mA @24V (max. 250mA)
Power source
External stabilized power supply
Measurement and control:
Number of channels
No internal measuring channels
Signal types and supported number of inputs/outputs using external modules
It results from the modules used. The CPU allows you to connect up to 10 I/O modules, obtaining up to 120 supported I/O (10x external 12-channel module)
Processor, memory, performance:
Processor
ARM Cortex-M7 200MHz
User program size
Up to 2 MB
Stored in the internal file system
User program memory
1 MB MCU FLASH (fast; program code only)
128 kB MCU SRAM (fast; only stack and program data)
4 MB SDRAM (shared between code and data)
RETAIN data size
0.25 MB (saved to the internal file system when the user program is stopped and restored when the user program is started)
Configurable program cycle time
50..1000ms
Installation:
Type of installation
DIN rail, Type O, 35 mm
Full specification in the attached Product Data Sheet.